To size an exhaust tip correctly, measure the outer diameter of your car's tailpipe and order a tip whose inlet diameter matches it — for example, a tailpipe measuring about 60 mm across needs a tip with a 60 mm inlet, or a reducing adapter pipe. The outlet size and the style are cosmetic choices; the inlet diameter is the fitment-critical number. When the two sizes do not match, an adapter or transfer pipe bridges the gap safely.
How to Measure Your Tailpipe for an Exhaust Tip
Three steps, five minutes, one caliper or ruler:
Step 1 — Measure across the tailpipe end. Place the caliper jaws across the opening of the tailpipe and read the outer diameter, including the pipe wall. Measure at the very end of the pipe, not further up the system.
Step 2 — Measure twice, at different angles. Pipes can be slightly oval after bending or cutting. Take a second measurement rotated 90 degrees and use the larger reading as your reference.
Step 3 — Match the number to the tip's inlet diameter. The inlet is the opening at the back of the tip that receives the tailpipe. Catalog listings such as Size:63 or Diameter:89 refer to this inlet number in millimetres. If the tailpipe measurement and the inlet are not the same size, plan for an adapter — do not force the fit.
Exhaust Tip Inlet Size Chart: Real Catalog Examples
Inlet sizes are not random — they follow the engine and exhaust layout of each vehicle. The table below shows real entries from our catalog with their listed sizes, so buyers can see how one size family spans different cars and constructions. Weights are catalog values; material and MOQ are available on request.
| Listed Size | Catalog Example | Application | Weight |
|---|---|---|---|
| Size:51 | JC-BENZ-044 | 08-13 Mercedes-Benz W221 S65 style conjoined square (straight pipe) | 2.4KG |
| Size:55/67 | JC-BMW-064 | BMW G20-G28 M3 style split round simple exhaust | 5KG |
| 2.0 Size:60 / 3.0 Size:70 | JC-LAND ROVER-004 | Land Rover Defender Black Knight style split round (size follows the 2.0 or 3.0 engine version) | 2.35KG |
| Size:63 | JC-BENZ-073 | Mercedes-Benz W463-W464 G500-G550-G63 Brabus style single round | 2.3KG |
| 2.0T:54 / 3.0T:65 (transfer and takeover) | JC-AUDI-060 | Audi Q8 19-23 SQ8 style split ellipse, adapter pipes included | 4.66KG |
| Diameter:76 | JC-GENERAL-018 | Universal AK type carbon fiber single round (interface caliber can be customized) | 0.5KG |
| Diameter:89 | JC-GENERAL-019 | Universal AK type carbon fiber single round (interface caliber can be customized) | 0.51KG |
| Diameter:101 | JC-GENERAL-004 | Universal inclined double-layer welding single round (with holes) | 1.1KG |
| Diameter:114 | JC-GENERAL-009 | Universal inclined double-layer welding single round (with holes) | 1KG |
| Diameter:94 / Port:71 | JC-MINI-002 | MINI F55/F56/R55/R56 carbon fiber single round (JC-MINI-003 is Diameter:109 / Port:88) | 0.51KG |
Two patterns are worth noticing. First, the same car can need two different sizes depending on the engine — the Defender entries above list Size:60 for the 2.0 version and Size:70 for the 3.0 version, and the Audi Q8 kit ships different transfer pipes for the 2.0T (54 mm) and 3.0T (65 mm) tailpipes. Second, universal tips are offered in a ladder of standard diameters (76, 89, 101, 114 mm), so exhaust shops can pick the closest size and adapt.
When the Inlet and the Tailpipe Do Not Match
A mismatch does not have to kill the sale. Three working solutions, in order of preference:
1. Order the correct size variant. Many model-specific tips already exist in engine-specific sizes. Ask the supplier for the variant that matches the tailpipe rather than modifying a wrong part.
2. Use the included adapter or transfer pipe. Kits such as the Audi Q8 SQ8 style tip above are sold "including transfer and takeover" — the Y shaped inlet pipes in the photos are exactly this: they connect a fixed tip outlet to a specified tailpipe inlet size. When ordering, the buyer only needs to tell the supplier which engine version the customer's car has.
3. Ask about custom inlet calibers. Several universal carbon fiber models in the catalog are listed with "the interface caliber can be customized". For dealers and tuning shops, this turns one popular tip style into several inlet sizes. Custom size range, minimum order quantity and sampling time: please confirm with our team.
What does not work: stretching, cutting or wedging a tip onto a pipe of the wrong size. It leaves visible stress marks on the finish and the joint can work loose later.
Inlet vs Outlet: Which Number Decides Fitment
| Measurement | What it is | Role in ordering |
|---|---|---|
| Inlet diameter | Opening at the back of the tip that receives the tailpipe or adapter | Fitment-critical — must match the tailpipe (directly or via adapter) |
| Outlet size and shape | Visible opening: round, square, ellipse, single or split | Cosmetic — choose by style preference and bumper opening |
| Overall dimensions | Length and width of the whole tip | Must suit the bumper cutout — check against the model-specific listing |
FAQ
What size exhaust tip do I need for a 60 mm tailpipe?
For a 60 mm tailpipe, order a tip listed with a 60 mm inlet, such as the 2.0 engine version of the Land Rover Defender style tips (Size:60), or a universal tip in the nearest standard diameter combined with a reducing adapter. Measure the tailpipe first and match the inlet number, not the outlet appearance.
Do exhaust tips come in different inlet sizes?
Yes. Inlet sizes differ by vehicle and engine, which is why the catalog lists separate entries such as Size:51, Size:55/67, Size:60, Size:63, Size:70 and universal tips in 76, 89, 101 and 114 mm diameters. The same tip style is often available in more than one inlet size.
Will a bigger exhaust tip fit my car with an adapter?
In many cases yes — an adapter or transfer pipe connects a larger inlet to a smaller tailpipe, and kits like the Audi Q8 SQ8 style tip ship with dedicated transfer pipes for 2.0T (54 mm) and 3.0T (65 mm) tailpipes. The visible outlet does not change; only the connection is adapted. Confirm the adapter size and availability with the supplier before ordering.
Does the outlet size affect anything besides looks?
The outlet size and shape determine how the tip fills the bumper opening and how the car reads visually; fitment itself is governed by the inlet. Styling guidance — round versus square, single versus dual or quad outlets — is a separate topic from sizing, and both numbers should be confirmed before an order is placed.
What size data should wholesale buyers record before ordering?
Record five fields for every order line: vehicle brand and chassis code, model year range, outlet layout, tailpipe outer diameter (measured, not estimated), and the requested inlet diameter or adapter size. Buyers who record measured tailpipe diameters cut their return rate dramatically, because most "does not fit" cases trace back to an inlet mismatch rather than a wrong style.
Request a Size-Matched Quotation
D.BOX supplies model-specific and universal exhaust tips in the inlet sizes shown above, with adapter and transfer pipes for common engine versions and customizable inlet calibers on selected carbon fiber models. Send us the vehicle list, chassis codes and measured tailpipe diameters, and we will match each car to the correct part. Contact D.BOX at info@exhaustupgrade.com or WhatsApp +86 151 0516 7588, or browse the catalog at www.exhaustupgrade.com. Wholesale and OEM inquiries are welcome.
Trademark notice: BMW, MINI, Mercedes-Benz, Audi, Land Rover, Defender and the vehicle models named above are trademarks of their respective owners, used here only to describe vehicle fitment. D.BOX is an independent aftermarket supplier and is not affiliated with, sponsored or endorsed by any vehicle manufacturer.